Evonne Bonnet Ceiling Fans March 26, 2019 07:54:02
I myself am a do-it-myself kind of person. I don’t like paying for something I can very well do myself. I have 12 fans in my house, and I installed them all. All, that is, except the very first one. For the first one I called an electrician. The reason for this was that I wanted to make sure I wasn’t going to be overloading any circuits. I had him check my breakers, and I showed him where I wanted to install future fans. Sure, it cost me a hundred bucks to have him come out and install that first fan, but for that hundred bucks I also got a free check on all my other future locations. Now I knew, I could install fans wherever I wanted, and there was going to be no danger of circuit overload. Personally, I think I got a very good deal for that initial $100.
Hugger Mounting: Hugger model fans are simply fans mounted close to the ceiling, that will seem as though they are clinging to or "hugging" the ceiling directly. This can also be referred to as the close-to-ceiling-mount.
There are 2 types of outdoor ceiling fans, those rated for DAMP locations and those rated for WET locations. There is a notable difference between the two and it is important that you choose the right type for your application. In either case, make sure the fan you purchase is UL Listed for the application you need so that you know it can be safely installed without creating a potential electrical hazard.
J-hook and claw hook: With this type of mounting a metal hook secures to the ceiling, so that your fan will be directly attached to the material of the ceiling wall/
Take a walk-through of the nearest Home Depot. By walking up and down the aisles and looking at the various fans that are displayed on the ceilings above, you’ll be able to see how much lower some fans hang than others do. By sticking with the options that hug the ceiling, you’ll have your light and air circulation back and in working condition in no time.
A down rod is nothing more than an extension, really. The higher your ceiling, the longer you want the down rod to be. If you have ten foot ceilings, you should have a one-foot down rod. Down rods increase total airflow and bring the blades themselves closer to where you need it.